Point the sensor area away from any charged objects (point it toward an empty room or grounded surface). Press the button. The display will flash, adjust to , and emit a short double beep. Taking Static Measurements Aim the sensor front at the target surface.
If you own an FMX-002, the is your Rosetta Stone. If you own a newer unit, search specifically for that model number.
Do not rely on guesswork. Get the manual, read it cover to cover, and become the ESD expert your team needs.
This post assumes the reader is a technician, quality manager, or ESD specialist who has lost their physical copy and needs the digital version quickly.
The SIMCO FMX-002 is a portable, compact electrostatic fieldmeter used to locate and measure static charges. This guide provides the complete operational procedures, calibration steps, and technical specifications for the FMX-002. 1. Technical Specifications
| Parameter | Value | |-----------|-------| | Measurement Range | 0 to ±22.0 kV (1 kV = 1000V) | | Distance to Target | 25 mm (1 inch) — fixed, using built-in spacers | | Accuracy | ±5% of reading ±2 digits | | Response Time | < 1 second | | Operating Mode | Continuous, peak hold, or average | | Power | 9V alkaline battery (6LR61/6F22) | | Auto Power Off | After 5 minutes of inactivity | | Dimensions | 130 x 70 x 28 mm | | Weight | ~ 230 g (including battery) |
Note: The FMX-002 cannot measure on conductive surfaces unless they are isolated from ground.
Wear an ESD wrist strap connected to a known ground. Turn On: Press the POWER button. Positioning (Crucial Step): Hold the
Point the sensor area away from any charged objects (point it toward an empty room or grounded surface). Press the button. The display will flash, adjust to , and emit a short double beep. Taking Static Measurements Aim the sensor front at the target surface.
If you own an FMX-002, the is your Rosetta Stone. If you own a newer unit, search specifically for that model number.
Do not rely on guesswork. Get the manual, read it cover to cover, and become the ESD expert your team needs. simco fmx002 manual full
This post assumes the reader is a technician, quality manager, or ESD specialist who has lost their physical copy and needs the digital version quickly.
The SIMCO FMX-002 is a portable, compact electrostatic fieldmeter used to locate and measure static charges. This guide provides the complete operational procedures, calibration steps, and technical specifications for the FMX-002. 1. Technical Specifications Point the sensor area away from any charged
| Parameter | Value | |-----------|-------| | Measurement Range | 0 to ±22.0 kV (1 kV = 1000V) | | Distance to Target | 25 mm (1 inch) — fixed, using built-in spacers | | Accuracy | ±5% of reading ±2 digits | | Response Time | < 1 second | | Operating Mode | Continuous, peak hold, or average | | Power | 9V alkaline battery (6LR61/6F22) | | Auto Power Off | After 5 minutes of inactivity | | Dimensions | 130 x 70 x 28 mm | | Weight | ~ 230 g (including battery) |
Note: The FMX-002 cannot measure on conductive surfaces unless they are isolated from ground. Taking Static Measurements Aim the sensor front at
Wear an ESD wrist strap connected to a known ground. Turn On: Press the POWER button. Positioning (Crucial Step): Hold the