For some specific TV lines (like Hospitality models), official support partners provide software. For instance, support documents for the HFL5x14, HFL6x14, and other HFL series are available. These sources are reliable, but always verify they match your TV.
Power the TV completely. It is strongly recommended to unplug the TV from the wall socket to ensure it is completely powered down. Connect the USB flash drive to the USB port on the TV. Plug the TV back into the wall socket and turn it on.
Network/HTTP/FTP update
Philips engineers designed this file to be read by a device’s internal “loader”—a low-level software that runs before the main operating system boots. The loader’s job is to erase the old firmware and write the new one into the device’s flash memory.
Switch the USB drive to a different port on the television and repeat the power-cycling process. upgrade-loader.pkg philips
: Always delete the file from your USB after a successful update to prevent accidental re-installations on other devices. Last Resort : Only use this method if standard autorun.upg
file is your primary tool for a "forced" or emergency recovery Unlike a standard update file, the upgrade_loader.pkg
In order to be eligible to make a warranty claim, you must complete the registration for warranty here: www.deckwise.com/warranty/register.html
The method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to contract. For some specific TV lines (like Hospitality models),
Running screws straight down with composite/PVC decking allows these materials to naturally move on their length.
| Board Thickness | Board Width |
|---|---|
| A* = Measurement Of Your Decking | B** = Measurement Of Your Decking |
| Thickness of Cut | Cutting Height | Cutting Depth |
|---|---|---|
| C = 5/32" (4mm) | D*** = (A-5/32")/2 | E = 1/2" (13mm) |
| During Installation |
|---|
| F**** = 3/32" (2,4mm) |
* If using 1-1/2" (38,1mm) or thicker material, you may need to upgrade to a longer screw option than what is typically packaged with the fastening kit.
** For decking 8" (20,32cm) or wider, the (A) dimension should be at least 1-1/2" (38,1mm). Using a wide plank such as this for surface decking will most likely cause cupping issues regardless of how the material is fastened if thicker material is not used.
*** This formula will create a symmetrical profile that allows you to flip and/or rotate the decking to be able to put the best side up. Power the TV completely
**** Fastener automatically achieves correct gap spacing when boards are pushed tight during installation.
Deck Fastener Ipe Clip® Kits may be ordered in differences of 100 count (50 sq. ft.) components and 175 Complete Kit sizes (100 sq. ft.). All deck building screws may also be special ordered with diverse screw lengths, color and style.
Kits come with 25 wood plugs, and 25 stainless steel #8x2" deck screws.
Sold Seperately
EXTREME® Ipe Clip® Series - U.S. Patent Numbers 8,464,488 and 8,806,829.
Original, “round”, STANDARD Ipe Clip® - U.S. Patent No. D470,039.
EXTREMEKD® and EXTREME4® Licensed under U.S. Patent Nos. 7,874,113 and 8,161,702 Patent.
